| |
The table below gives an example of some of the materials and thicknesses that can be profiled using our laser technology. It is not exhaustive, so please contact us for more details if there is a particular material you wish to profile that is not listed here. In addition some of the maximum material thickness's can be exceeded - please contact us and arrangements. Thank you.
|
Material Specification
|
Maximum Thickness Minimum thickness from 0.02mm
|
Comments
|
| Aluminium |
6.0mm |
|
| Armour Plate |
15.0mm |
|
| Brass |
4.0mm |
|
| Carbon Steels |
25.0mm |
|
| Duplex |
25.0mm |
Clean cut with Nitrogen |
| Electrical Steels (eg transil, Losil, Newcor) |
All |
|
| Hastalloy |
16.0mm |
|
| Inconel |
12.0mm |
Clean cut with Nitrogen |
| Invar |
12.0mm |
Clean cut with Nitrogen |
| MDF |
50.0mm |
|
| Mild Steels |
25.0mm |
|
| Nomex |
All |
|
| Paper |
All |
|
| Phos Bronzee |
4.0mm |
|
| Radiometal |
All |
|
| Shim Steels |
All |
|
| Spring Steels annealed and prehardened (e.g. CS4, CS70, CS80, CS95,CS100) |
All |
|
| Tool Steels annealed and pre hardened (e.g. O1, M2, D2, HSS, L3) |
15.0mm |
|
| Stainless Steels (all grades, all finishes such as Dull Polish, Mirror Polish - PVC coated) |
25.0mm |
|
| Wear Plate (e.g. 400, 500 grades) |
16.0mm |
|
| Wood (eg Ply, Hardboard, Balsa) |
30.0mm |
|
|
|
)
)
)
